MAMBA Stack F722 MK3 50A 6S 8bit (NO WIFI)-PREORDER

DIATONE OFFICIAL

  • $74.99
Shipping calculated at checkout.


Note:Shippment will after Chinese New Year due to material shortage and Holiday delay.

Mamba F722 MK3 50A 8bit 6S M3/30mm Stack

 

Fixed

  • Add I2C function
  • When you connect the USB, the receiver and OSD settings can be saved
  • Increase the pad area
  • LED signal selection (when Mamba Led sys avaiable)
  • BEC short circuit protection
  • TVS instant high voltage protection 30V

Update

  • Upgrade the anti-interference cable
  • Use Typec(Most)
  • The pad area of the Mini flight controller (20×20) increased by 140%

Added

  • Add self-recovery insurance to the receiver's 5V power supply.
  • Increase the camera VCC power supply pad.
  • The standard flight controller (30.5×30.5) adds a spare pad.
  • Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference.

    Diagram Link From Help Centre Link

    FC Specifications
    MAMBA Basic F722MK3
    MCU: 216MHz STM32F722RET6
    GYRO: MPU6000
    Barometer: Yes
    OSD: Yes
    Blackbox: 16M Flash Memory
    Uarts: 6Set
    ESC Soft: Dshot300/600
    ESC Telemetry: Yes
    Power Led: Yes
    LED Controller: BF LED/MB LED(4 Set 2812 LED)
    S/F.Port: Yes
    RSSI: Yes
    Buzz: Yes
    Input: 3~6S Lipo (12.6~25.2V)
    TVS Protection: Yes
    BEC:3.3V 0.5A& 5V 3A (System Power)&
    5V 3A(LED)& 9V 3A
    MOUNTING: 30.5mm, M3

    ESC Specifications
    MAMBA F50
    INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
    CONTINUE CURRENT: 50A×4
    BURST CURRENT: 55A (10S)
    BEC: No
    Target:BLHeli_S CH40
    SOFT: Dshot300/600
    TVS Protection: Yes
    MOUNTING: 30.5mm/M3

    Supply :
    High-Frequency 470uF/35V ×1
    8pin sh1.0 ×2
    12AWG 100mm ×2
    AMASS Original XT60


    We Also Recommend