MAMBA | Super Big Soldering Pad
Mamba F722 MK3 50A 8bit 6S M3/30mm Stack
- Add I2C function
- When you connect the USB, the receiver and OSD settings can be saved
- Increase the pad area
- LED signal selection （when Mamba Led sys avaiable）
- BEC short circuit protection
- TVS instant high voltage protection 30V
- Upgrade the anti-interference cable
- Use Typec（Most）
- The pad area of the Mini flight controller (20×20) increased by 140%
- Add self-recovery insurance to the receiver's 5V power supply.
- Increase the camera VCC power supply pad.
- The standard flight controller (30.5×30.5) adds a spare pad.
- Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference.
MAMBA Basic F722MK3
MCU: 216MHz STM32F722RET6
Blackbox: 16M Flash Memory
ESC Soft: Dshot300/600
ESC Telemetry: Yes
Power Led: Yes
LED Controller: BF LED/MB LED（4 Set 2812 LED）
Input: 3~6S Lipo (12.6~25.2V)
TVS Protection: Yes
BEC:3.3V 0.5A& 5V 3A (System Power)&
5V 3A(LED)& 9V 3A
MOUNTING: 30.5mm, M3
INPUT VOLTAGE: 3~6S Lipo (12.6V~25V)
CONTINUE CURRENT: 50A×4
BURST CURRENT: 55A (10S)
Supply: Panasonic High-Frequency 470uF/35V
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.